Cooling system elements
Now we will discuss the subject of cooling system elements in the field of installation technology and air conditioning.
The main element of the system that absorbs low pressure and gaseous refrigerant and sends high pressure and gas to the condenser.compressors,
It acts as an evaporator by taking in heat and as a condenser by giving off heat. serpentines,
Our expansion elements control the flow by reducing the pressure as it passes under high pressure from the refrigerants that condense into liquid in the condensate.
capillary boronin expansion element
Internally balanced thermostaticexpansion valve,
Externally balanced thermostatic expansion valve,
It is installed on the compressor suction to prevent the liquid fluid coming to the suction line before it turns into vapor in the evaporator from entering the compressor.suction accumulator,
It prevents the oil from filling and ensures the proper functioning of the pistons. crankcase heater,
Liquid tank where the refrigerant fluid is stored as a liquid with refrigerant in systems with expansion valves.liquid tank,
Filter installers that retain water and moisture, acid shavings, welding burrs, sediment and other impurities in the cooling system.Drayerler,
Auxiliary element that allows us to monitor the service personnel's refrigerant status from a certain point.sight glass,
Pressure switches used to prevent danger arising from excessively high or excessively low pressure in the high pressure line in the cooling system.Combined automatic,
Electronic sensors that show the increase or decrease of resistance depending on temperaturethermistors,
Service personnel we use in fluid charging and discharge vacuuming and recovery processes.Compressor inlet and outlet valves,
Control element that allows fluid to pass in one directioncheck valve,
Absorbs impact and sound by changing the direction and speed of the refrigerantsilencers,
It allows the air from which heat is taken from the indoor unit and outdoor unit or whose temperature rises to be discharged to the environment.fan motors,
It controls the panels that direct the indoor unit coil horizontally and vertically while the conditioned air is discharged to the environment. swing motors,
It is located on the winding that provides the first start to the compressor and serves in the permanent circuit.permanent circuit capacitor,
It opens and closes according to the movement produced by a magnetic coil used to control the electrical circuit. relays,
It is connected serially to the compressor common end and acts as a protector against overcurrent.thermals,
High power electronic electromagnetic switch contactors,